西安不锈钢拉丝板；西安不锈钢镜面板；西安不锈钢开平板
【标题】：供应1.0-1.2-1.5-2.0mm西安不锈钢冷轧板
【关键词】：西安不锈钢冷轧板；陕西不锈钢板批发；
【名称】：西安304材质不锈钢板；西安201材质不锈钢板；西安316L材质不锈钢板
冷轧板规格：1000*2000；1219*2438；1220*2440
市场行情：从2017年6月15日开始；不锈钢冷轧板的价格一涨再涨，基本每天都会涨价，这种行情相当不乐观。
供应1.0-1.2-1.5-2.0mm西安不锈钢冷轧板
文章英文对应翻译：
Xi'an stainless steel drawing plate; Xi'an stainless steel mirror panel; Xi'an stainless steel Kaiping plate [title]: 1.0-1.2-1.5-2.0mm Xi'an stainless steel cold rolled sheet [Keywords]: Xi'an stainless steel cold rolled plate; Shaanxi stainless steel plate wholesale; [name]: Xi'an 304 material stainless steel plate; Xi'an 201 material stainless steel plate; Xi'an 316L material stainless steel plate Cold rolled plate specifications: 1000*2000; 1219*2438; 1220*2440;
供应1.0-1.2-1.5-2.0mm西安不锈钢冷轧板 冷轧：
Cold: hot rolled steel coil as raw material by pickling descaling after cold rolling, the finished rolling hard volumes, due to continuous deformation caused by cold hardening the volume rolling hard strength, hardness, toughness index rise decline, so the stamping performance will deteriorate, only for a simple deformation of parts. Rolled hard rolls can be used as raw material for hot galvanizing plants, because the hot galvanizing units are equipped with annealing lines. The roll weight is usually 6~13.5 tons, and the coil is rolled continuously at room temperature. The inner diameter is 610mm. Product features: without annealing treatment, the hardness is very high (greater than 90 HRB), the mechanical performance is poor, only a simple bending process is less than 90 degrees direction (perpendicular to the direction of the volume). To put it simply, cold rolling is rolled out on the basis of hot rolled coils, generally in the process of hot rolling --- acid washing -- cold rolling. Cold rolling is made from hot rolled sheets at room temperature, although it is also possible to warm the steel plate during rolling because, of course, it is called cold rolling. Because of the cold rolling of continuous hot rolling, the mechanical properties are poor and the hardness is too high. It must be annealed to restore its mechanical properties. Rolled rolls are generally used to make products without bending or stretching. 供应1.0-1.2-1.5-2.0mm西安不锈钢冷轧板
供应1.0-1.2-1.5-2.0mm西安不锈钢冷轧板；不锈钢冷轧卷板
陕西加汇商贸有限公司
刘经理：029-89540811
陕公网安备 61010402000321号
